Description

Monitor Audio Gold 200 5.1 Speaker Package:

 

This Package Includes:

• x2 Monitor Gold 300
• x2 Monitor Gold FX
• x1 Monitor Gold C250 Center Speaker
• x1 Monitor Gold W-12 Subwoofer

 

Description of the Monitor Audio Gold 300 Speakers: 

 

 

Gold 300 is the pinnacle of the range. Its deceptively large cabinet houses a 2½” (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer above and a pair of 203 mm RDT II bass drivers below, in a true three-way arrangement.

 

Also featuring a pair of rear-facing HiVe II ports delivering smooth airflow and ample bass reinforcement, Gold 300 is the ideal speaker for larger rooms. Its punch and dynamism are matched only by its subtlety and fidelity – Gold 300’s effortless authority, from a crisp 50 kHz at the top end to an earth-moving 30 Hz at the bottom, makes it perfect for any and all listening requirements.

 

 

Specifications of the Monitor Audio Gold 300 Floorstanding Speakers:

System Format:	3-way
Frequency Response (-6dB):	30 Hz – 50 kHz
Sensitivity (1W @ 1M):	90 dB
Nominal Impedance:	4 Ohms
Minimum Impedance:	3.5 Ohms @ 1 kHz
Maximum SPL:	117 dBA (Pair)
Power Handling:	250 W
Recommended Amplifier Requirments:	100 – 250 W
Bass Alignment:	Bass Reflex, Dual HiVe II port system
Crossover Frequency:	L.F/ M.F: 650 Hz M.F/ H.F: 3 kHz
Drive Unit Complement:	2 x 8″ RDT II long-throw bass driver 1 x 21/2″ C-CAM mid-range driver 1 x MPD high-frequency transducer
External Dimensions (Including Grille And Terminals):	1000 x 240 x 360.6 mm
External Dimensions (including Outrigger Feet and Spikes (H x W x D)):	1047 x 327.8 x 417.8 mm
Weight (Each):	30.56 kg
Sold As:	Pair

 

Description of the Monitor Audio Gold FX Surrounds:

 

 

Nothing enhances your home cinema experience like a dedicated surround sound speaker. A compact, discreet design, yet able to pack in two MPD high-frequency transducers and two 4″ (100 mm) mid/bass C-CAM drivers, Gold FX can be flush-mounted and can function in either bi-pole or di-pole modes at the flick of switch.

Monitor Audio are masters of the effects speaker, and the Gold FX represents the state of the art.

 

Key Features:

• Discreet design with flush wall placement – recessed terminations
• Angled baffles for optimal dispersion
• Sealed cabinet – for accurate performance when installed in restricted voids or close to a wall
• Switchable di-pole/ bi-pole configuration – handed pairs
• Dual MPD high frequency transducer – articulate, extended high frequencies, yet supremely smooth
• Dual 4″ Bass/Mid-range drivers with C-CAM cone technology
• Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
• Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
• High-quality crossovers with premium-grade polypropylene film capacitors used throughout
• Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
• Dedicated flexible bracket included for easy installation

 

Specifications of the Monitor Audio Gold FX Surround Speakers:

 

System Format:	2-Way
Frequency Response (-6dB):	60Hz – 50kHz
Sensitivity (1W @ 1M):	86dB
Nominal Impedance:	4 Ohms
Minimum Impedance:	3.7 Ohms @ 3kHz
Maximum SPL:	109 dBA (Pair)
Power Handling (RMS):	100W
Recommended Amplifier Requirments:	30W – 100W
Bass Alignment:	Sealed Cabinet
Crossover Frequency:	2.5kHz
Drive Unit Complement:	2 x 4″ C-CAM mid-range driver 2 x MPD high-frequency transducer
External Dimensions (Including Grille and Terminals (H x W x D)):	270 x 341.8 x 160 mm
Weight (each)	6.2 kg

 

Description of the Monitor Audio Gold C250 Center Speaker:

 

 

The centre speaker does the majority of the heavy lifting in any home cinema system – but that doesn’t mean a centre speaker must look like a heavyweight. Thanks to the compact dimensions of the 2½” (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, and the 6½” (165 mm) RDT II bass drivers either side, Gold C250 is a three-way design without the big footprint you might expect.

Its wide dispersion characteristics make it a wide-screen listen, and it’s adaptable enough to sit happily between any of the speakers in the Gold Series.

 

Key Features:

• Sealed cabinet configuration for in-cabinet or close to wall placement
• MPD high frequency transducer – articulate, extended high frequencies, yet supremely smooth
• Dual 6.5″ bespoke bass drivers, featuring:
  • – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
  • – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
• Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
• Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
• Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
• Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
• Custom-made, high-quality gold plated bi-wire terminals

 

Specifications of the Monitor Audio Gold C250 Center Speaker:

System Format:	3-way
Frequency Response (-6dB):	40 Hz – 50 kHz
Sensitivity (1W @ 1M):	88 dB
Nominal Impedance:	4 Ohms
Minimum Impedance:	2.8 Ohms @ 3.7 kHz
Maximum SPL:	111 dBA (each)
Power Handling (RMS):	200 W
Recommended Amplifier Requirments:	80 – 200 W
Bass Alignment:	Sealed cabinet
Crossover Frequency:	L.F/ M.F: 1.2 kHz M.F/ H.F: 4 kHz
Drive Unit Complement:	2 x 61/2″ RDT II long-throw bass driver 1 x 21/2″ C-CAM mid-range driver 1 x MPD high-frequency transducer
External Dimensions (Including Grille and Terminals (H x W x D)):	205 x 537 x 330.6 mm
Weight (each)	14.48 kg

 

Description of the Monitor Audio Gold W12 Subwoofer:

 

 

For lovers of deep and refined bass notes, the Gold W12 is a must-have addition to any speaker set-up. Every soundtrack is reinforced by the deep and balanced depth effortlessly delivered by our premium subwoofer.

All of the rumble and wallop of Hollywood’s most action-packed blockbusters is yours from the potent Gold W12 Subwoofer, in which a 12″ (305 mm) long-throw driver is reinforced by a pair of Auxiliary Bass Radiators (ABR) and powered by 600 W of Class D amplification. The power and scale this combination are capable of generating can be felt just as easily as it can be heard, thanks to its prodigious 20 Hz bass extension.

Gold W12 has a number of fine-tuning options, and thanks to Monitor Audio’s Automatic Position Correction (APC) system, the subwoofer can work at its optimum no matter where it’s positioned. And this is no blunt instrument – Gold W12 is just as capable of delivering all the music and harmonic detail of a kettle drum to the earth-shattering power of a volcanic explosion.

Settings adjustment is provided by the innovative controller mounted on the cabinet top panel, or by using Monitor Audio’s proprietary ‘SubConnect’ software. The settings provide four fully configurable user pre-sets per input, including modes for; Flat/Music/Movie and Impact equaliser settings. Fine-tuning can be made by adjusting the frequency, slope, trim and equaliser filters for each pre-set. The Night Mode actively reduces the dynamic range of louder sections according to the level the listener desires.

 

Key Features:

• Three driver subwoofer system featuring two 200 mm ABR’s (Auxiliary Bass Radiators)
• Punchy bass below 20 Hz
• Ultra-long throw 12″ driver featuring:
  • – Dished C-CAM cone
  • – Black pole and motor plates for effective heat radiation
  • – Larger 75 mm diameter voice coil – black anodised to radiate more heat away
  • – Triple suspension for ultimate linearity – ensuring control at high power and excursions
• Powerful 600 Watt Hypex Class-D Amplifier module, with switching power supply – provides instantaneous deliveryof high current when required
• DSP processing with all control features and crossover performed digitally
• APC (Automatic Position Correction) – in-house developed automatic room set-up feature using microphone for simple system optimization
• Top mounted control panel
• USB for connection to ‘SubConnect’ application, firmware updates and service

 

Specification of the Monitor Audio Gold W12 Subwoofer:

System Format:	Long-throw 12″ driver featuring ‘dished’ C-CAM cone. Dual 200 mm ABR (auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment
Low Freuqency Limit:	-3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default):   -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz
Upper Frequency Limit:	-3 dB @ 150 Hz
Driver Unit Complement:	1 x 12″ C-CAM subwoofer driver featuring triple suspension and 3″ long throw voice coil
Linear Driver Excursion:	19 mm Peak to Peak, Total displacement 1.6 Litres
Amplifier Output:	600W
Amplifier Classification:	Class D with high current Switch mode power supply (SMPSU)
DSP:	50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU
Digital Conversion	24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core
LED UI Control Panel	Adjustable brightness 0% – 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select
Global Settings (via SubConnect)	Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to 20 dB, Trim -11 to 11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)
User Presets (via SubConnect)	4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to 6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)
User Equalisation (via SubConnect)	6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact
Room Correction EQ	6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
Night Mode	Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections
Phase Control	0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees
Low Pass Filter Alignment	2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
Auto Sensing Input Requirements	Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes
Digital Volume Level	-11 to 11 dB in 1 dB increments, via the control panel. -80 to 20 in 1 dB increments, via SubConnect application
IR Remote Control Code	Supplied IR remote. Front facing IR receiver with red LED indication
SubConnect (PC Application)	Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup
Audio Input/Outputs	LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)
Connection	12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA – 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update
Electrical Certifications	CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)
Mains Input Voltage	100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)
Power Consumption	Maximum 600 W, Standby <0.5 W (ErP compliance)
Fuse Type	20 mm T8AL 250 VAC
Weight (unpacked)	26.98 kg
External Dimensions (Including Amp, Drivers and Terminals (H x W x D))	413 x 410 x 433.5 mm
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))	445 x 410 x 433.5 mm

 

 

Do you love the Monitor Audio Gold 200 5.1 Speaker Package? See more Monitor Audio products here: https://www.soundxshop.co.za/product-category/shop-by-brand/shop-by-brand-monitor-audio/